Léo BERNARD

Portfolio

Léo
BERNARD

Materials Engineer (master’s level) | Materials Science, Composites & Polymers.

9 allée des tilleuls, 58160 Chevenon, Franceleobernard.58@gmail.com+33762876346
Materials Engineer holding a French Engineering Degree (Diplôme d'Ingénieur, Master's level) from the University of Technology of Troyes (UTT), following a two-year technical degree (DUT) in Physical Measurements. My five-year academic background represents a total of 300 ECTS credits, including 120 ECTS from the DUT and 180 ECTS from the engineering program. My background includes a 10-week quality control internship (at Aperam Alloys Imphy) and two 6-month R&D internships focused on polymers and composites. My experience spans different research environments, including an industrial R&D department (OPmobility) and an engineering consulting company (ALTEN), where I also had the opportunity to work directly in a research laboratory (ICA). I have developed hands-on skills in materials characterization, process optimization, experimental work, and data analysis. Curious, organized, independent, and sociable, I adapt easily to new working environments thanks to my personality and the diversity of my experiences. Passionate about scientific research, I particularly enjoy hands-on and experimental work, which allows me to bridge the gap between theory and practice and tackle real-world challenges. I believe that one of my main strengths lies in the way I work and approach problems. Rigorous and methodical, I like to understand the challenges I face, approach them logically, and find practical and suitable solutions. I enjoy learning, taking on new challenges, and stepping outside my comfort zone. Far from being an obstacle, discovering new fields, working methods, and international environments is a genuine source of motivation for me.
Experience

R&D - Final-Year (5th Year) Materials Engineering Internship - 26 Weeks

ALTEN SE·TOULOUSE
Sep 2025 — Mar 2026
Final-year R&D engineering internship at ALTEN Innovation Department (Toulouse, France), within the Zéphir project aiming to break windsurfing speed records in collaboration with industrial and academic partners. One of the objectives was to design an eco-engineered windsurfing board prototype for JEC 2026 (ARKEMA stand), integrating recycled and recyclable materials (including recycled carbon fibers) while combining high performance, industrial feasibility, and reduced environmental impact. The work was structured around three complementary areas:
  • Experimental: characterization and processing of recycled carbon fiber reinforcements, including drapability studies, infusion trials, and process/design optimization (plies, fiber type, etc) using a Taguchi Design of Experiments. Mechanical behavior was assessed through tensile and dissolution tests.
  • Numerical: development of image-based methods to analyze fiber orientation distributions and estimate effective mechanical properties, combined with video analysis of the infusion process to extract permeability data. These results were implemented into process simulations to optimize infusion parameters and reduce manufacturing defects such as dry spots.
  • Environmental: Life Cycle Assessment (LCA) conducted to compare multiple design scenarios and support material and process selection toward lower environmental impact solutions.
I authored a comprehensive state-of-the-art report on composite materials and manufacturing processes, produced a technical reports, and presented progress during weekly project meetings. I also coordinated with external consultants to ensure methodological consistency and technical alignment. This work contributed to the understanding and initial qualification of recycled carbon fiber reinforcements for structural applications, demonstrating their relevance for high-performance composite systems and supporting the development of more sustainable and efficient composite structures.
BlenderDissolution testDrapabilityExperimental designFeasibilityImage processingLaboratory workLife Cycle AssessmentLiterature reviews / State of the art / Bibliographic researchMechanical propertiesMicrosoft OfficeNumerical simulationOptimizationPython (Spyder)Tensile testVacuum Infusion ProcessVideo processing

R&D - 4th-year Materials Engineering Internship - 26 weeks

OPmobility
Feb 2024 — Aug 2024
Internship within the R&D center of OPmobility, H2-POWER division, located in Genk (Belgium), focused on the development of high-pressure hydrogen vessels, conducted in an applied research environment centered on carbon fiber composite structures and thermoset resin systems, with a strong focus on resin behavior and process optimization for structural applications. The work was structured around a combined experimental and modeling approach.
  • The experimental part focused on the characterization of fast-curing thermoset resins used in wet filament winding, with more than 300 tests performed, including DSC analysis to establish curing kinetics and build Time–Temperature–Transformation (TTT) diagrams. Cure simulator experiments were then used to investigate key relationships between degree of cure, viscosity, electrical properties, and glass transition temperature (Tg) under representative processing conditions. This was complemented by the analysis of data from thermocouples embedded in real manufacturing conditions within pressure vessels, providing validation in industrial settings.
  • In parallel, curing kinetic models were calibrated to describe and predict resin behavior under different thermal cycles. Data processing and analysis were automated using Python to improve efficiency and reproducibility, while close collaboration with materials and simulation teams enabled the connection between experimental results and modeling approaches.
This work contributed to a better understanding of resin curing kinetics and to the development of predictive models for composite processing. It also enabled the identification of key experimental tests required to efficiently characterize new resin systems, allowing a more targeted and time-efficient experimental strategy for future studies. The final outcome was a contribution to process optimization, particularly enabling a significant reduction in the curing time of high-pressure hydrogen vessels.
Carbon fibreCompositeCost modellingDSCGlass transition temperatureLiterature reviews / State of the art / Bibliographic researchMicrosoft OfficePresentationsProtocol creationPython (Spyder)ThermocoupleThermoset resinTrial and errorTTT diagramViscosityWet filament winding

Landscape worker

JSP paysage·VARENNES-VAUZELLES
Jul 2023 — Jul 2023
Lawn mowing, weeding, brush clearing, hedge trimming, and general landscaping duties.

Quality Control Technician Internship - 10 weeks

APERAM ALLOYS IMPHY·IMPHY
Apr 2022 — Jun 2022
  • 10-week internship as part of the 2-year university degree (DUT) in the Quality Control department.
  • Involved in the qualification of a magnetic measurement bench, replacement of an arc welding recorder, and metrology.

Lifeguard

ADESS 58·CHEVENON
Jul 2019 — Jul 2021
July 2019, July 2020, July 2021 ; Responsible for the safety and supervision of a designated swimming area, ensuring prevention, surveillance, and emergency response.
Education

Engineering degree (master's level) in Materials Science

University of Technology of Troyes (UTT)
2022 — 2026
Engineering program in Materials Science, 180 ECTS credits (≈3 years). Courses taken: polymer chemistry, polymers and composites, nanomaterials, macro and microscopic characterization, materials for energy, life cycle analysis of materials, mechanics of materials, introduction to CAD (CatiaV5 - Creo), radiation-matter interactions, purchasing techniques and cost reduction, materials commerce, standards and regulations, innovation.

Exchange semester - Master's level in Materials Science

Budapest University of Technology and Economics
2025 — 2025
Courses taken: composite technology, thermal physics, environmental chemistry and technology, cross-cultural communication (English level B2), ethics for engineers, hungarian culture

University Technical Diploma (DUT) in Physical measurements

University Institute of Technology (IUT) of Bourges
2020 — 2022
A technical university degree, 120 ECTS credits (2 years). Physical Measurements : Material science option. Skills & knowledge related to a D.U.T. in Physical Measurements: metrology, chemistry, optics, thermodynamics, fluid mechanics, electronics, electricity, mechanics.

First year of common core medical studies (P.A.C.E.S.)

Faculty of medecine
2019 — 2020

French Baccalaureate (High School Diploma)

Jules Renard
2016 — 2019
Science series with Biology and Earth science option.
Skills

Other skills

CoordinationSpectroscopy (UV, IR, Raman)Microscopic analysis (AFM, SEM, XRD, ellispometry)Surface Energy & WettabilitySynthesis and analysis of polymersChromatographyCATIA V5CreoRTMsimAbaqus
Awards

AWARDS

innovation UTT CRUNCHTIME Challenge (05/2023) Member of the winning team within our thematic group at the innovation UTT CRUNCHTIME Challenge, a 3-day interdisciplinary competition involving teams of 6 students from diverse engineering disciplines. The challenge, proposed by an industrial partner and focused on the recycling of boat sails, required responding to a real-world problem within 3 days through a technical report and an explanatory video presentation.
Languages
EnglishC1 level (B2+ certified by "linguaskill")
FrenchNative speaker
Interests

HOBBIES

Sports: Climbing (bouldering), Swimming (7 years of practice in a leisure club) Horology: Watch collection and interest in horology
Professional Background

REFERENCES

Dr. Léonard SERRANO - PhD in Materials Science , R&D Program Director, Alten leonard.serrano@alten.com, +33 7 82 57 84 34 Dr. Paulo FLORES - PhD in Applied Sciences (Mechanics of Materials) , Mechanical Engineer, OPmobility paulo.flores@opmobility.com, +32 455 12 36 57

EXTRACURRICULAR ACTIVITIES

Event team 09/2024 – 01/2025 | TROYES Organizing events for students throughout a semester.